Farmall 400 specs and problems
The Farmall 400 is a popular agricultural tractor produced by International Harvester between 1954 and 1956. It was a part of the Farmall “letter series“ tractors and was designed to replace the Farmall Super M.
Farmall 400 specs
What engine is in a Farmall 400? The Farmall 400 tractor is powered by a six-cylinder gasoline engine with a displacement of 264 cubic inches or 4.3 liters. This engine was known as the C-264 engine and was specifically developed for use in the Farmall 400 tractors.
The C-264 engine featured overhead valves and produced up to 64 horsepower at the drawbar and 74 horsepower at the belt pulley. It was an improvement over the previous engine used in the Farmall Super M, which had a four-cylinder engine.
Overall, the C-264 engine in the Farmall 400 was designed to provide reliable and efficient power to the tractor for use in various agricultural applications.
How much horsepower does a Farmall 400 have?
Farmall 400 horsepower: The engine is capable of producing up to 64 horsepower at the drawbar and 74 horsepower at the belt pulley.
Transmission: The Farmall 400 has a four-speed manual transmission with two reverse gears. The tractor also features a torque amplifier, allowing the operator to shift between higher and lower gears without using the clutch.
Hydraulics: The Farmall 400 comes equipped with a hydraulic system with a maximum capacity of 2,500 pounds. This allows the tractor to power various implements such as plows, cultivators, and mowers.
PTO: The tractor has a live PTO (power take-off) that provides 540 RPMs of output speed.
Tires: The Farmall 400 has standard front tires of size 6.00-16 and rear tires of size 14.9-38. However, some models were also available with narrow front tires of size 5.50-16.
Weight: The tractor weighs approximately 5,600 pounds.
Dimensions: The Farmall 400 has a wheelbase of 94 inches and measures 155 inches in length, 93 inches in width, and 90 inches in height.
In summary, the Farmall 400 is a powerful and versatile tractor designed for use in the agricultural industry. Its six-cylinder engine, four-speed manual transmission, and live PTO make it a reliable choice for powering various implements. With its durable construction and excellent performance, it remains a popular choice for farmers and collectors alike.
FAQ
How fast does a Farmall 400 go?
Farmall 400 specs: The Farmall 400 is a tractor primarily designed for use in the agricultural industry, and as such, it is not intended to travel at high speeds. The maximum speed of a Farmall 400 is around 15-20 miles per hour (24-32 kilometers per hour), depending on several factors like the condition of the engine and transmission, tire size, terrain, and load being carried.
However, it’s important to note that this tractor is not typically used for transportation purposes but rather for performing tasks related to farming and other agricultural activities. So, the top speed of the Farmall 400 is not usually a significant factor when considering its capabilities or limitations for most of these applications.
In summary, the Farmall 400 is not a vehicle that is designed for high-speed transport, and its maximum speed is generally limited to much lower speeds required for performing various farming tasks.
What year was the Farmall 400 made?
The Farmall 400 was a gasoline powered tractor that was manufactured only in 1955-1956.
Like any other tractor, the Farmall 400 may experience some common problems. Here are a few issues that some users have reported:
- Overheating: The Farmall 400’s cooling system can sometimes fail, leading to overheating of the engine. This can be caused by a malfunctioning radiator, water pump, or thermostat.
- Clutch issues: Some users have reported clutch problems with their Farmall 400 tractors. This can include difficulty engaging or disengaging the clutch, or slipping of the clutch during use. These issues typically require repairs to the clutch assembly.
- Electrical problems: Electrical issues such as faulty wiring, dead batteries, or malfunctioning alternators can cause problems with the Farmall 400’s electrical system. These issues often require troubleshooting and replacement of damaged components.
- Hydraulic system malfunctions: The hydraulic system on the Farmall 400 can sometimes malfunction, causing the tractor to lose power to implements or making it difficult to lift and lower attachments. This can be caused by a variety of factors such as low hydraulic fluid levels, damaged hoses, or worn out seals.
- Steering problems: Some Farmall 400 owners have reported issues with the steering system, including excessive play in the steering wheel or difficulty turning the tractor. These issues can be caused by worn steering components such as tie rods or steering gears, and may require replacement of these parts.
It’s worth noting that many of these problems are common to tractors in general and can be addressed through regular maintenance and repairs. With proper care and attention, the Farmall 400 can be a reliable and long-lasting workhorse for years to come.
Related Posts
About The Author
