Toro Wheel Horse 8-25: Your Ultimate Guide

Toro Wheel Horse 8-25 specs, parts diagram, belt replacement and more... Explore the world of Toro Wheel Horse 8-25 in this comprehensive guide. Learn about its features, maintenance, and frequently asked questions. In this guide, we’ll delve into every aspect of this remarkable machine, from its features to maintenance tips. Let’s get started on the journey of discovering what makes the Toro Wheel Horse 8-25 exceptional.

The Toro Wheel Horse 8-25 specs

The Toro Wheel Horse 8-25 is a robust and reliable riding lawnmower designed to make lawn maintenance a breeze. With its powerful engine and user-friendly features, it’s a favorite among landscaping professionals and homeowners alike.

Engine Detail	Briggs & Stratton 195707
Fuel Type	Gasoline
Cylinder	1
Cooling System	Air-cooled
Shaft Orientation	Vertical-shaft
Displacement	318 cc
	19.44 cubic inches
Bore/Stroke	3.00 x 2.75 inches
	76 x 70 mm
Power (Gross)	8 hp
	6.0 kW
Starter	Electric
Starter Voltage	12

This table provides detailed information about the Briggs & Stratton 195707 engine.

Year Range	1993 – 1998
Model	Riding Lawn Mower
Series Map	8-25
	11-32
Engine Power	8.0 hp
	11.5 hp
Transmission	Peerless 700
Transmission Type	Belt-Driven Gear
Gears	5 Forward, 1 Reverse

This table provides an overview of the model year, type, series map, engine power, transmission, and gear information for the riding lawn mower with the specified specifications.

Tire Type	Size
Lawn/Turf Front	11×4.00
Lawn/Turf Rear	13×5.00

Dimensions	Measurements
Wheelbase	41 inches
	104 cm
Length	52 inches
	132 cm

This table provides details about the tire sizes and dimensions of the Toro 8-25 model.

Toro wheel horse 8-25 belt replacement

Replacing the belt on your Toro Wheel Horse 8-25 lawn mower is an essential maintenance task to ensure the mower’s optimal performance. Here’s a step-by-step guide to help you with the belt replacement process:

Tools and Materials Needed:

1. New drive belt
2. Socket set
3. Wrench
4. Screwdriver
5. Pliers
6. Safety glasses
7. Work gloves

Step 1: Safety Precautions Before you start, make sure the mower is turned off, the ignition key is removed, and the spark plug wire is disconnected to prevent accidental start-up.

Step 2: Raise the Mower Deck To access the belt, you’ll need to raise the mower deck. Use the deck height adjustment lever to lift the deck to its highest position.

Step 3: Locate the Drive Belt Locate the existing drive belt on the underside of the mower deck. You may need to remove any debris or grass clippings to get a clear view.

Step 4: Remove the Old Belt To remove the old belt, you’ll need to release tension from the belt idler pulley. Depending on your model, this can be done by pulling on a release lever or loosening a retaining bolt. Once the tension is released, slide the belt off the pulleys.

Step 5: Install the New Belt Take your new drive belt and thread it through the same path as the old belt, ensuring it fits onto all the pulleys correctly. Refer to your owner’s manual for a belt routing diagram if needed.

Step 6: Reapply Tension Return the belt idler pulley to its normal position to apply tension to the new belt. Make sure the belt is snug and properly seated on all the pulleys.

Step 7: Test the Belt Turn the mower deck height adjustment lever to a lower setting and then back to its highest position. This will engage and disengage the belt, allowing you to check if it’s functioning correctly.

Step 8: Reconnect Spark Plug Wire Once you’re confident that the belt is in place and working as it should, reconnect the spark plug wire.

Step 9: Lower the Mower Deck Lower the mower deck to your desired cutting height.

Step 10: Test the Mower Start the mower and test it by engaging the blades and driving it around. Ensure that the new belt is operating smoothly and efficiently.

By following these steps, you can successfully replace the drive belt on your Toro Wheel Horse 8-25 riding lawn mower, helping to maintain its performance and extend its lifespan. Always refer to your specific model’s owner’s manual for additional guidance and safety instructions.

Toro wheel horse 8-25 starter replacement

Toro wheel horse 8-25 parts diagram

Maintenance Tips

Maintaining your Toro Wheel Horse 8-25 is crucial to ensuring its peak performance and longevity. Here are some essential maintenance tips:

• Regular Cleaning: Keep your lawnmower clean from grass clippings and debris to prevent clogs and rust.
• Oil Changes: Regularly change the oil to ensure the engine runs smoothly.
• Blade Sharpening: Sharp blades result in cleaner cuts, so sharpen them as needed.
• Air Filter Replacement: Replace the air filter to maintain optimal engine performance.

Toro wheel horse 8-25 price

The price of a Toro Wheel Horse 8-25 can vary depending on several factors, including its condition, age, and any additional attachments or features it may have. On the used market, you can find Toro Wheel Horse 8-25 models priced anywhere from a few hundred dollars to over a thousand dollars. Newer or well-maintained models with additional features may be on the higher end of that price range, while older or less-equipped models may be more affordable. Average price : $ 250.00 

SSS

When did Toro stop making Wheel Horse? Toro stopped making Wheel Horse tractors in 2007. The Wheel Horse brand, which was known for its durable and reliable lawn and garden tractors, was acquired by Toro in 1986. After nearly two decades under the Toro umbrella, the decision was made to discontinue the Wheel Horse line of tractors in 2007.