Troubleshooting common Massey Ferguson 135 problems

Massey Ferguson 135 problems: The Massey Ferguson 135, a beloved and iconic tractor, has been a workhorse on farms around the world for decades. With its classic red and grey exterior, it represents a symbol of reliability and productivity. However, even the most dependable machines can encounter issues over time. In this article, we delve into the common problems that owners and operators of the Massey Ferguson 135 may encounter during their ownership journey. From mechanical hiccups to electrical glitches, we’ll explore the challenges and potential solutions that keep this legendary tractor running smoothly.

Massey ferguson 135 hydraulic problems

If you’re experiencing hydraulic problems with your Massey Ferguson 135 tractor, it’s essential to address them promptly to maintain the tractor’s functionality. Here are some common hydraulic issues that you might encounter and possible solutions:

1. Hydraulic Fluid Leaks:
   • Issue: Hydraulic fluid leaks are a common problem and can lead to reduced hydraulic power and potential damage.
   • Solution: Inspect the hydraulic lines, fittings, and seals for leaks. Replace any damaged components and tighten loose connections. Ensure the hydraulic fluid level is correct and use the recommended fluid.
2. Slow or Weak Hydraulic Lift:
   • Issue: If the hydraulic lift is slow to respond or lacks lifting power, it can hinder your tractor’s performance.
   • Solution: Check the hydraulic filter for clogs and replace if necessary. Inspect the hydraulic pump for wear or damage and replace it if needed. Adjust the relief valve to the proper pressure setting.
3. Erratic Hydraulic Operation:
   • Issue: The hydraulic system may exhibit erratic behavior, such as sudden drops or surges.
   • Solution: Inspect the control valve and linkage for any obstructions or damage. Ensure that the control lever or joystick operates smoothly. Adjust and lubricate as required.
4. Hydraulic Noise:
   • Issue: Unusual noises from the hydraulic system can indicate issues with the pump, valves, or fluid cavitation.
   • Solution: Check the hydraulic fluid level and quality. Replace it if it’s contaminated. Inspect the pump for damage or excessive wear. Tighten loose components and ensure proper fluid circulation.
5. Implement Won’t Stay Raised or Lowered:
   • Issue: If the implement won’t stay in the desired raised or lowered position, it can affect your work.
   • Solution: Inspect the control valve for any sticking or damage. Adjust the control linkage to ensure proper operation. Check the lift cylinder for leaks or internal damage.
6. Inconsistent Three-Point Hitch Operation:
   • Issue: The three-point hitch may not operate consistently or may have difficulty maintaining the correct implement height.
   • Solution: Check the draft control system and adjust it to the desired sensitivity. Ensure the control lever is set correctly for the type of implement you’re using.
7. Complete Hydraulic Failure:
   • Issue: In extreme cases, the hydraulic system may experience a complete failure.
   • Solution: Inspect the hydraulic pump, control valve, and hoses for any severe damage or blockages. This may require professional diagnosis and repair.

Always refer to your Massey Ferguson 135 tractor’s user manual for specific troubleshooting guidance and maintenance procedures. If you are unable to resolve hydraulic problems on your own, it’s advisable to consult a qualified technician or a Massey Ferguson dealership for professional assistance.

Massey Ferguson 135 multi power problems

If you’re encountering issues with the Multi Power system on your Massey Ferguson 135 tractor, it’s important to address them to maintain the tractor’s functionality. The Multi Power system is a unique feature that provides high and low gear ranges for improved versatility. Here are some common Multi Power problems and potential solutions:

1. Failure to Engage Multi Power:
   • Issue: The Multi Power system may not engage or disengage correctly.
   • Solution: Inspect the Multi Power control linkage for damage or misalignment. Adjust or replace any worn components. Ensure that the control lever or switch is functioning correctly and lubricate as needed.
2. Slipping Gears in Multi Power Mode:
   • Issue: Gears may slip or not hold properly when the tractor is in Multi Power mode.
   • Solution: Check the Multi Power clutch for wear or damage. If it’s worn out, it may need replacement. Also, verify that the hydraulic pressure is at the correct level. Adjust it if necessary.
3. Noisy Operation in Multi Power Mode:
   • Issue: Unusual noises, such as grinding or clunking sounds, during Multi Power operation.
   • Solution: Inspect the Multi Power components for damage or wear, including the clutch and gears. Properly lubricate the system to reduce friction and noise.
4. Erratic Multi Power Engagement:
   • Issue: The Multi Power system may engage or disengage unexpectedly.
   • Solution: Check for loose or damaged wiring, switches, or sensors associated with the Multi Power system. Replace or repair any faulty components. Ensure that the control lever or switch is securely in the desired position.
5. Loss of Multi Power Functionality:
   • Issue: The Multi Power system may lose its ability to provide high and low gear ranges.
   • Solution: Inspect the Multi Power clutch, control valve, and hydraulic pump for damage. If any components are faulty, they may need replacement. Adjust the control linkage to ensure proper engagement.
6. Multi Power Oil Leaks:
   • Issue: Hydraulic fluid leaks in the Multi Power system can lead to performance issues.
   • Solution: Inspect the Multi Power system for leaks, including hoses, seals, and connectors. Replace any damaged or worn components. Ensure that the hydraulic fluid level is correct and use the recommended fluid.
7. Professional Diagnosis:
   • In cases where you are unable to identify or resolve Multi Power problems on your own, it’s advisable to consult a qualified technician or a Massey Ferguson dealership. They can perform a thorough diagnosis and repair any internal Multi Power system issues.

Regular maintenance and prompt attention to Multi Power issues can help ensure the continued reliability and functionality of your Massey Ferguson 135 tractor. Always refer to the tractor’s user manual for specific troubleshooting guidance and maintenance procedures.4

Massey Ferguson 135 lift problems

Here are some common lift problems and potential solutions:

1. Lift Not Responding:
   • Issue: The three-point hitch system doesn’t respond when you operate the lift control.
   • Solution: Check the hydraulic fluid level in the tractor’s reservoir. If it’s low, fill it to the recommended level. Inspect the hydraulic pump for damage or wear and replace it if necessary. Ensure that there are no obstructions or blockages in the hydraulic lines.
2. Slow or Weak Lifting:
   • Issue: The lift operates slowly or struggles to lift implements.
   • Solution: Check the hydraulic filter for clogs and replace it if needed. Inspect the hydraulic pump for wear or damage and replace it if required. Adjust the relief valve to the proper pressure setting.
3. Lift Drops Unintentionally:
   • Issue: The three-point hitch may lower on its own without operator input.
   • Solution: Inspect the control valve and linkage for any sticking or damage. Adjust the control linkage to ensure it operates smoothly. Check the lift cylinder for leaks or internal damage.
4. Lift Stuck in Raised Position:
   • Issue: The three-point hitch remains in the raised position and won’t lower.
   • Solution: Check the control linkage and control valve for obstructions or damage. Ensure that the hydraulic fluid can flow back to the reservoir properly. It may require adjusting or repairing the control components.
5. Noisy Lift Operation:
   • Issue: Unusual noises during lift operation, such as clunking or grinding sounds.
   • Solution: Inspect the hydraulic fluid level and quality. Replace it if it’s contaminated. Check the lift cylinder for any damage or wear. Properly lubricate the moving parts to reduce friction and noise.
6. Inconsistent Three-Point Hitch Operation:
   • Issue: The three-point hitch may not operate consistently or may have difficulty maintaining the correct implement height.
   • Solution: Check the draft control system and adjust it to the desired sensitivity. Ensure the control lever is set correctly for the type of implement you’re using.
7. Preventive Maintenance:
   • Regularly inspect and maintain the hydraulic system according to the manufacturer’s recommendations. This includes greasing and lubricating components and checking for hydraulic fluid leaks.

If you’re unable to resolve lift problems with your Massey Ferguson 135 tractor after performing these checks, it’s advisable to consult a qualified technician or a Massey Ferguson dealership for professional assistance. They can conduct a more in-depth diagnosis and address any internal hydraulic system issues that may require specialized tools and expertise.

Massey Ferguson 135 fuel pump problems

Here are some common fuel pump issues and potential solutions:

1. Fuel Pump Not Priming:
   • Issue: The fuel pump fails to prime or supply fuel to the engine.
   • Solution: Check the fuel lines for blockages or kinks. Ensure that the fuel filter is not clogged and replace it if needed. Inspect the fuel pump for damage or wear and replace it if necessary. Verify that the fuel shutoff valve is open.
2. Low Fuel Pressure:
   • Issue: The tractor experiences low fuel pressure, resulting in poor engine performance.
   • Solution: Inspect the fuel pump for wear or damage, including the diaphragm and seals. Replace the pump if necessary. Check the fuel pressure regulator and adjust it to the correct pressure setting.
3. Fuel Pump Leaks:
   • Issue: Fuel leaks from the fuel pump can be hazardous and cause fuel wastage.
   • Solution: Inspect the fuel pump for leaks around gaskets, fittings, or the diaphragm. Replace any damaged or worn components. Ensure all connections are tight and secure.
4. Fuel Pump Noisy Operation:
   • Issue: Unusual noises, such as clicking or knocking, from the fuel pump.
   • Solution: Inspect the fuel pump for any loose components or damaged parts. Properly lubricate the pump if it has moving parts. Consider replacing the fuel pump if the noise persists.
5. Fuel Contamination:
   • Issue: Contaminated fuel can damage the fuel pump and affect engine performance.
   • Solution: Drain and replace the fuel if it’s contaminated. Install a fuel filter/water separator to prevent further contamination. Clean the fuel tank if necessary.
6. Lack of Fuel Delivery:
   • Issue: The fuel pump may not deliver an adequate amount of fuel to the engine.
   • Solution: Inspect the fuel lines, especially for blockages or restrictions. Check the fuel tank for debris or sediment that may be clogging the fuel system. Ensure that the fuel pump is correctly calibrated and adjusted.
7. Professional Inspection:
   • If you’re unable to identify or resolve fuel pump problems on your own, it’s advisable to consult a qualified technician or a Massey Ferguson dealership. They can perform a more thorough diagnosis and repair any internal fuel system issues that may require specialized tools and expertise.

Regular maintenance, including fuel filter replacement and using clean, high-quality fuel, can help prevent fuel pump problems in your Massey Ferguson 135 tractor. Always refer to your tractor’s user manual for specific maintenance recommendations.

Massey ferguson 135 starting problems

Experiencing starting problems with your Massey Ferguson 135 tractor can be frustrating, but there are several common issues and solutions to consider:

• Weak or Dead Battery:
  • Issue: If the tractor’s battery is weak or dead, it won’t have enough power to start the engine.
  • Solution: Check the battery voltage with a multimeter. If it’s below the recommended level, charge or replace the battery as needed. Ensure that the battery terminals are clean and securely connected.
• Faulty Starter Motor:
  • Issue: A malfunctioning starter motor can prevent the engine from cranking.
  • Solution: Inspect the starter motor for any damage or wear. If it’s faulty, it may need to be repaired or replaced.
• Ignition Switch Problems:
  • Issue: A faulty ignition switch can disrupt the starting process.
  • Solution: Test the ignition switch with a multimeter to ensure it’s functioning correctly. If it’s defective, replace it.
• Fuel Delivery Issues:
  • Issue: Insufficient fuel delivery can hinder the starting process.
  • Solution: Check the fuel filter for clogs and replace it if necessary. Verify that the fuel shutoff valve is open. Ensure the fuel system is primed if needed.
• Glow Plug Problems:
  • Issue: If equipped with glow plugs, they may not be heating properly, making it difficult to start in cold conditions.
  • Solution: Test the glow plugs for continuity and replace any faulty ones. Ensure they are working correctly, especially in cold weather.
• Air in Fuel System:
  • Issue: Air trapped in the fuel system can prevent the engine from starting.
  • Solution: Bleed the fuel system to remove air bubbles. Consult your tractor’s manual for specific bleeding instructions.
• Spark Plug Issues:
  • Issue: For gasoline engines, fouled or worn spark plugs can cause starting problems.
  • Solution: Inspect the spark plugs for fouling or damage and replace them if necessary. Ensure the spark plug wires are connected securely.
• Compression Problems:
  • Issue: Low compression in the cylinders can make starting difficult.
  • Solution: Perform a compression test to check cylinder compression. Low compression may indicate engine issues that require professional attention.
• Professional Inspection:
  • If the starting problem persists after checking these common issues, it’s advisable to consult a qualified technician or a Massey Ferguson dealership. They can perform a more in-depth diagnosis and identify any underlying engine or electrical issues.

FAQ: Massey Ferguson 135 problems

What engine is in a Massey 135?

The Massey Ferguson 135 tractor typically comes equipped with a Perkins A3.152 diesel engine. This engine is a three-cylinder, naturally aspirated diesel engine with a displacement of approximately 2.5 liters (152 cubic inches). It’s known for its reliability and efficiency, making it a popular choice for agricultural tractors like the Massey Ferguson 135.

What year did they stop making Massey Ferguson 135?

The Massey Ferguson 135 tractor was manufactured from 1964 to 1975. Production of this model ceased in 1975, and it was replaced by newer models in the Massey Ferguson lineup.

What is the top speed of a Massey Ferguson 135?

The top speed of a Massey Ferguson 135 tractor typically ranges from 12 to 19 miles per hour (19 to 30 kilometers per hour), depending on various factors such as engine condition, tire size, and any modifications that may have been made.

What is the TYRE pressure for a Massey Ferguson 135?

For a MF 135, the maximum pressure for 11.2×28 rear tyres is 14psi (4 ply) or 22psi (6 ply); for 6.00×19 front rubber it’s 26psi.